User`s manual

Appendix D: Updating the Software
AXIS 570/670 MIO User’s Manual 159
Appendix D Updating the Software
Software that can
be Updated
• AXIS NetPilot™ configuration software.
• AXIS Print Utility for Windows.
• AXIS Print Utility for OS/2.
• The AXIS 570/670 MIO software held in Flash Memory
.
• The axinstall script.
• The AXIS MIB file.
All software updates are free of charge.
Flash Memory
The AXIS 570/670 MIO print server software is stored in Flash
Memory. This memory is provided by a silicon chip that like
any other ROM device, retains data content even after power is
removed. However, Flash Memory is unique because it allows
its data to be erased and re-written. This means that you can
install software updates for your AXIS 570/670 MIO as soon as
they become available, without having to replace any parts. The
new software is simply loaded into the AXIS 570/670 MIO over
the network.
Checking if an update
is available
Over the Internet you may wish to check the Axis WWW Home Page
at http://www.axis.com/, where you can down-load the latest
versions of the software utilities.
Anonymous FTP files and information are also available through
anonymous ftp: log in to ftp.axis.com and go to the /pub/axis
directory.
Updating the AXIS
570/670 MIO Flash
ROM
You can carry out an update to your AXIS 570/670 MIO Flash
Memory via the Flash loading port using the optional Flash loading
kit, or over the network using AXIS NetPilot™ on a NetWare
network.