User`s manual

Section 2: Basic Installation
AXIS 570/670 MIO User’s Manual 15
AXIS 670 MIO Physical Description
Test Button
The test button is used for:
• Printing a test page to check the connection to the printer.
• Printing the parameter list showing all the AXIS 670 MIO
settings.
• Resetting the AXIS 670 MIO parameters to the factory default
settings.
Refer to Appendix A - The Test Button for more information about
printing and resetting the parameters.
Ring Speed Jumper
This jumper is set to match your network speed. The jumper (S4) is
located on the printed circuit board. With the jumper in place, the
network speed is 16 Mbit/s. Remove the jumper to select 4 Mbit/s.
Network Indicator
This flashes to indicate network activity.
Token Ring
UTP connector
Token Ring
STP connector
Network Indicator
Test Button
Ring Speed Jumper Flash Loading Port