User`s manual

Appendix B: The Parameter List
AXIS 570/670 MIO User’s Manual 133
Appendix B The Parameter List
This appendix contains an overview of the AXIS 570/670 MIO
parameters and how to edit them. A sample parameter list is included
in this appendix. However please note that there may be some
differences in the parameter list in your print server because of recent
firmware updates.
Please refer to the AXIS Network Print Server Technical reference for a
complete description of the parameters. Alternatively you may wish to
access the Axis WWW Home Page at http://www.axis.com/, where
you can down-load the latest technical information.
Editing using
AXIS NetPilot™
The parameters are most easily edited using the AXIS NetPilot™
software from a Windows platform.
Editing using a Web
browser
If your network supports TCP/IP you may view and edit the
AXIS 570/670 MIO parameter list using any standard Web browser.
Editing using FTP
You can also use FTP to connect to your AXIS 570/670 MIO. The
parameters are stored in a file named config. The parameters can be set
by editing this file by carrying out these three steps:
1. Up-load the config file to your system.
2. Edit the parameter values.
3. Down-load the modified file to the AXIS 570/670 MIO.
To use FTP to change the config file:
1. Log in to the AXIS 570/670 MIO. Command:
ftp <host name>↵.
Enter
root
as user id and
pass
as password.
2. Up-load the config file. Command:
get config↵
3. Edit the file using your preferred text editor.