User`s manual

Section 8: Setting Up - UNIX
AXIS 570/670 MIO User’s Manual 105
UNIX
Section 8 Setting Up - UNIX
Installation in the UNIX Environment
Having performed the basic TCP/IP setup procedures as defined in
Section 2 - Basic Installation, you are now able to print in interactive
mode using FTP or Reverse Telnet protocols.
However, should you require to integrate the AXIS 570/670 MIO into
your host spooler you will now need to use the Axis automatic
installation script axinstall. This software utility is resident on the
AXIS 570/670 MIO and can be up-loaded to your host using FTP, so
no disks or tapes are required. Having completed this operation the
AXIS 570/670 MIO will appear as though it is directly connected to
the host printer spooler.
If you intend to operate your AXIS 570/670 MIO in a multiprotocol
environment, you should also proceed according to one or more of the
following sections, as appropriate to your network.
Section 3 Setting Up - SNA
Section 4 Setting Up - NetWare
Section 5 Setting Up - Windows
Section 6 Setting Up - OS/2
Section 7 Setting Up - Macintosh
Section 9 Web Based Management
SNA