User`s manual

Section 7: Setting Up - Macintosh
100 AXIS 570 MIO User’s Manual
Apple
EtherTalk
Choosing a Printer
Selecting a Printer
The method for choosing a printer will vary depending on which
version of LaserWriter printer driver you are using.
• The LaserWriter 7.0 driver assumes that you use a standard
PostScript driver, and cannot take advantage of any printer specific
features.
• The LaserWriter 8.0 driver uses PPD files that contain printer
descriptions. This gives you full control over any features your
printer might have.
LaserWriter 7.0
Printer Driver
Open the Chooser window by starting the Chooser from the Apple
menu. Follow these steps to choose a printer:
1. Click the LaserWriter icon.
2. If your network has more than one zone, click on the zone you
want. If your network has no zones, this box does not appear.
3. Click the name of the printer you want. The default AXIS 570
MIO printer names are shown as: AXIS<nnnnnn>_<port>, where
<nnnnnn> is the last six digits of the AXIS 570 MIO serial
number, and <port> is MIO. For example: AXIS100086_MIO.
4. Click the close box. This completes the configuration and closes
the Chooser.
Repeat this procedure for each Macintosh on the network using the
AXIS 570 MIO.
LaserWriter 8.0
Printer Driver
Open the Chooser window by starting the Chooser from the Apple
menu. Follow these steps to choose a printer:
1. Click the LaserWriter 8.0 icon.
2. If your network has more than one zone click on the zone you
want. If your network has no zones, this box does not appear.