User`s manual

Section 7: Setting Up - Macintosh
AXIS 570 MIO User’s Manual 99
Apple
EtherTalk
Section 7 Setting Up - Macintosh
This section describes how to set up your AXIS 570 MIO for printing
in the AppleTalk environment, after it has been connected to your
network.
If you intend to operate your AXIS 570 MIO in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 3 Setting Up - SNA
Section 4 Setting Up - NetWare
Section 5 Setting Up - Windows
Section 6 Setting Up - OS/2
Section 8 Setting Up - UNIX
Section 9 Web Based Management
Note:
❏ Please note that the AXIS 670 MIO does not support the Apple
TokenTalk environment.
Installation Using the Chooser Window
Basic Configuration
The basic configuration in the Apple EtherTalk environment is
performed simply by opening the Chooser
window and selecting a
printer.
You may change the default name of your AXIS 570 MIO or amend
any of default parameters if you wish. However, to access the config file
from a Macintosh you will need FTP support such as MacTCP, Fetch
or Anarchie. This is described in more detail later in this section.
Chooser
: Selecting chooser from the Apple menu initiates a search for
available printers on the network. The available printers, both
physical and logical, are then subsequently displayed with the
names given to them during configuration. Default names are
shown, unless they have been modified.
SNA