User`s manual

Appendix C: The Front Panel
80 AXIS AX-3 Cobra+ User’s Manual
0
9
8
7
6
5
4
3
2
1
The Rotary Switch
The ten-position rotary switch is used to set the device address for the
AX-3 Cobra+. It is also used to set start conditions and to select and
execute test functions during operation.
Start Conditions
The action when the AX-3 Cobra+ is switched on will be determined
by the setting of the rotary switch, as follows:
Device Address
Follow these steps to change the device address:
1. Switch the AX-3 Cobra+ off.
2. Select a new device address (positions 0-6).
3. Switch the AX-3 Cobra+ on.
A warning for change of device address will be printed.
4. Step the rotary switch one position forward and back.
The new device address will be confirmed by a printed message.
Pos. Description
0-6 Device address in normal print opera-
tion.
7 Reserved.
8 Select IBM Printer emulation (4214)
9 Perform a test printout.