User`s manual

Appendix A: The Parameter List
AXIS AX-3 Cobra+ User’s Manual 71
#45 Job Time-out
Timer value starting after a host job has ended. If the time-out value is
reached before any new data arrives at the Cobra+, the Start of Job
Sequence (#046), the Power-up Sequence (#090) and current
emulator settings will be sent before next host job.
#46 Start of Job Sequence
Sent before next host printout if timer Job Time-out has elapsed.
#53 Page Orientation Mode
Controls the text orientation. This parameter is only valid in IBM
3812/5219 emulation, and is fully compatible with the switch settings
on such a printer.
Value Description Value Description
*0 off
(default)
1-255 Value in seconds.
Value Description Value Description
<any
seq.>
(length and contents free of
choice)
*<empty
>
(default)
Value Description Value Description
0 Automatic Orientation, Portrait
if invalid page size.
4 Always Landscape
1 Automatic Orientation, Land-
scape if invalid page size.
5 Always COR
*2 Automatic Orientation, COR if
invalid page size.
(default)
6 Same as 2, but inhibit COR from
the system is ignored.
3 Always Portrait - -