User`s manual

Section 5: Solving Problems
64 AXIS AX-3 Cobra+ User’s Manual
Incorrect or insufficient bar code definition. The bar code must be
specified with five values. See page 48.
This message indicates that the non-volatile memory has been
corrupted. The AX-3 Cobra+ is automatically set to factory default
state (your configuration is lost). If the message does not re-appear
after power-off/power-on, configure the AX-3 Cobra+ (page 20).
This message will also appear as a normal consequence of a change
between laser and matrix emulation.
The available string area is exhausted. You must remove some strings
from your configuration. The size of the available string area is printed
in the Parameter List header, and is also displayed in all string
programming menus.
Hardware error. Contact you dealer/distributor.
E2-PERMANENT MEMORY CHECKSUM ERROR, FACTORY DEFAULTS
SET
E6-MEMORY OVERFLOW: FREE STRING AREA EXHAUSTED
F1-TWINAX TRANSCEIVER ERROR