User`s manual

Section 4: Advanced Functions
46 AXIS AX-3 Cobra+ User’s Manual
Left and Top Margin
Reduction
It is possible to move text to the left or upwards on the paper if you
want to reduce the margins.
Example:
To move the text 1/3 inch to the left and 1/2 inch upwards:
Notes:
❏ To Edit, Extended Emulation Mode must be entered.
❏ “55” and “56” are the Parameter numbers, followed by the
respective movement values in units of 1/72 inch. If any value is
set too large, the text will not be printed properly on the paper
area.
Vertical Compression
It is possible to compress the distance between lines. This is useful if
the lines are lost at the bottom of each page.
Example:
To compress the page length by 5%:
Note:
❏ To change, Extended Emulation Mode must be entered.
‘57’ is the Parameter number. The value ‘5’ will reduce the distance
between lines by 5%.
The setting does not affect the printing of the Parameter List or the
EBCDIC to ASCII table.
%P
(Configuration lead-in sequence)
=55,24
(Move text to the left 24/72 inch)
=56,36
(Move Text upwards 36/72 inch)
%
(Configuration trailer sequence)
%
(Configuration lead-in sequence)
=57,5
(Compress page length by 5%)
%
(Configuration trailer sequence)