User`s manual

Section 4: Advanced Functions
AXIS AX-3 Cobra+ User’s Manual 37
Notes:
❏ To redefine the sequences, Extended Emulation Mode must be
entered. The sequences are reset if you exit and re-enter Extended
Emulation Mode. See above.
❏ The sequences are redefined immediately. Therefore, the new
sequence ‘>&’ must be used as Configuration Trailer Sequence in
the document.
Example:
Use the new sequences in the same as the example on page 34
(Multi-byte Transparency on HP LaserJet):
Printout:
This is !?<1B266444>&underlined!?<1B266440>& text
This is underlined
text