User`s manual

Section 3: Configuration
AXIS AX-3 Cobra+ User’s Manual 23
Select IBM Printer
Emulation
This submenu is shown after you have selected Printer Driver.
The AX-3 Cobra+ together with the PC type printer will appear to the
IBM system as an original IBM twinax printer. You have to select
which IBM printer emulation that is to be used.
The default printer emulation is IBM 3812/5219.
Select the IBM Printer Emulation matching your system
configuration.
Note:
❏ Make sure the device address on the twinax port is configured
according to the IBM Printer Emulation.
You can select one of the following matrix emulations: IBM 4214
(default), IBM 5256, IBM 5224, IBM 5225. See page 12.
It is also possible to select IBM Printer Emulation using the rotary
switch. See page 82
=====================================================
BASIC CONFIGURATION
=====================================================
IBM PRINTER EMULATION
_IBM 3812/5219
Use <Up><Down> to move, <Enter> to select