Specifications

www.baldormotion.com
Basic Installa tion 3-3MN1941
3.1.3 Other requirements for installation
H The NextMove e100 requires a 24 VDC power supply capable of supplying 2 A continuously.
It is recommended that a separate fused 24 VDC supply is provided for the NextMove e100,
with the fuse rated at 4 A maximum. If digital outputs are to be used, a supply will be required
to drive them - see section 4.3.2.
H A PC that fulfills the following specification:
Minimum specification Recommended specification
Processor Intel Pentium 500 MHz Intel PentiumIII 1 GHz or faster
RAM 64 MB 128 MB
Hard disk space 40 MB 40 MB
CD-ROM ACD-ROMdrive
Communication USB port, RS232 / RS485/422 serial port, or Ethernet* port
Screen 1024 x 768, 16-bit color 1152 x 864, 16-bit color
Mouse A mouse or similar pointing device
Operating
system
Windows 2000 or Windows XP
* The Ethernet configuration used by a normal office PC is not suitable for direct
communication with the NextMove e100. It is recommended to install a separate dedicated
Ethernet adapter in the PC, which can be configured for use with the NextMove e100. See
section 5.2.4.
H A USB cable (supplied), or RS485/422 serial cable (not supplied).
H Y our PC operating system user manual might be useful if you are not familiar with Windows.