User`s manual

AXIS Camera Station - How to...

Scheduled recording

1. To set up a scheduled recording, start with the Continuous Recording Settings above and select the Custom

schedule radio button.

2. Choose a schedule from the drop-down list, click Edit to revise an existing schedule, or click New to create a

schedule.

3. Click OK to save settings.

See Set up schedules, on page 30 for more information on setting up schedules for recording or events.

Manual recording

With AXIS Camera Station you can manually record whenever you need to by

clicking on the button in the camera's Live view frame. Follow these

instructions to set up manual recording for a device.

Click on menu items Configur

ation > Recording Settings.

2. Select the camera and click the Manual button to open Edit

Manual Recording Settings.

3. Click the Change button to adjust the video setting profile. For additional information see Help.

4. Use the slidebars to set the number of seconds to include before (prebuffer) and after (postbuffer) the manual

recording.

5. Click OK to save settings.

To record, click on the

button that appears in the upper right corner when the cursor is over the camera's live view

frame. The camera is recording when a yellow indicator appears. Click the button again to stop recording.

You can also go through the menu item Actions and open

the Record Manually dialog. Click the Start button to begin

recording and the Stop button to end.

Motion triggered recording

Motion can be detected by Axis network cameras that have built-in motion detection software. Recording only when motion

is detected will save hard disk space compared to other options such as recording continuously. Motion Detection Recording

can be configured using the Event Configuration Wizard or the Recording Settings dialog as described here.

1. Click on menu items Configur

ation > Recording Settings. Select the camera and click the Motion Detection

button.

2. Check the Enabled box.

Motion detection settings

These instructions will step you through setting up the motion detection

window with object size, history, and sensitivity.

1. Set the Trigger period to the number of seconds between events.

For example, in cases where there is continuous motion to prevent

many alarms being sent, set the slidebar to the desired amount of

seconds between events.