User manual

AXIS Camera Station

Network and Security Conﬁguration

To conﬁgure the server proxy settings, follow these step s:

1. Open Service Control from Start > All Programs > AXIS Camera Station 3 > AXIS Camera Station Tools.

2. Check the box Modify server settings.

3. Under Proxy settings, select Use manual proxy settings.

4. Enter the address and port number of the proxy server. This is usually the same address and port number as under Internet

Options in Windows Control Panel.

5. If there are local devices that do not go through the proxy server, check Bypass proxy for local addresses and enter the

devices’ addresses in the box separated by semicolons.

Note

If you don’t know your proxy server settings contact yo ur network administrator.

For more information on AXIS Camera Station Service Control, see page 58.

Client Proxy Settings

The client proxy settings need to be conﬁgured if:

• AXISCameraStationClientandAXISCameraStation Server are separated by a proxy server

• your network uses a proxy for Internet connection and you want to check for and download ﬁrmware updates.

AXIS Camera Station Client behind a proxy. To connect to an AXIS Camera Station Server on the other side of the proxy, the client proxy

settings must be conﬁgured.

To conﬁgure the client proxy settings, follow these steps:

1. Open the File menu and select Client Proxy Settings.

2. Select the appropriate option depending on your setup

- Direct connection — This option should be checked if there is no proxy server between AXIS Camera Station Client

and A

XIS Camera Station Server.

- U

se Internet Explorer settings — AXIS Camera Station will use the same proxy settings as Internet Explorer

- Use manual proxy settings — This option allows you to ﬁll in the required information manually under Manual settings.