Manual

2.4 – Motor
Electrical motors used in döner-grillmachine can be operated two-ways (right/left). By
the electrical motor used in döner-grillmachine, each side of the skewered meat can
be grilled homogenously, and also the appliance is operated using less human effort.
* Do not clean the electrical motor with water. In döner-grillmachines with motor on
top, wipe the frame of the motor with a moist cloth, and then wipe it dry.
(In döner-grillmachine with motor at the bottom, the motor is shielded with a cover. Do
not operate the appliance without cover. Do not use water for cleaning. )
* Do not drop down the electrical motor.
* Protect the cord of the electrical motor from contacting directly with fire.
* In döner-grillmachine with motor on top, use the Heat Cap (5) being an original part
of the appliance, in order to protect the motor from excessive heat during operation.
(Figure 1-b)
* Check the electrical cord of the appliance before each operation. Cords affected by
heat or cut due to incorrect operation may cause leakage current.
By following instructions stated above, maximum efficiency is achieved with the motor
of the product.
Motor Technical Specifications:
- 115 Volt (AC) NPE ~ / 60 Hz
- 1 rpm
3,5 W
Motor Cord
2 – INSTALLATION INSTRUCTONS
Plug
Rotisserie
Guide
Rotisserie Guide
Motor Fixing Plate
Mount Opening
2 – INSTALLATION INSTRUCTONS
Switch