Manual

- After doing this, ensure that both the bottom slide (15) and the upper slide (3)

are aligned.

- Mount the original skewer turning arm to the top of the skewer, and rotate the

skewer using this arm. Doing this, higher hygiene and safety will be maintained

by enabling you to avoid the contact with the hot and fatty meat.

3.6.2 – Motor at Bottom Type Döner-Grillmachine

Since using a skewer turning arm is not possible with these types of appliances, it is

recommended to operate the appliance with motor. If the motor of your appliance has

a failure and immediate service response is not necessary, operate the appliance after

unplugging the electrical cord supplying power to the motor of the appliance. Call

authorized service as soon as possible for replacing the motor of your appliance.

Follow the procedure below, to operate your appliance without motor for a short

period of time: (Figure 2-b)

 Unscrew the fixing bolt (5) of the telescopic skewer supporter. By doing this, the

telescopic skewer supporter (1) will be raised up by the spring mechanism.

 Unscrew the skewer fixing screw (12).

 Insert the lower end (2) of the skewer with meat on, onto the skewer guide (22).

 Do not tighten the skewer fixing screw (12). Otherwise you will not be able to

rotate the skewered meat.

 Pushing the telescopic skewer supporter holding arm (4) down, insert the upper

side of the skewer (2) with meat on into the guide located on this arm.

 Tighten the fixing screw (5) of the telescopic skewer supporter.

 Your appliance is ready for use without motor. Unplug the appliance from power

supply during operation without motor.

NOTE: THOSE APPLIANCES HAVING A 3-DIGIT PRODUCT CODE ARE NOT

EQUIPPED WITH A TELESCOPIC SKEWER SUPPORTER. TAKING THIS INTO