Manual

3
Electrical Connections (Cord Connected Mixers)
· Before making the electrical connections, read the specifications on the nameplate to
make sure that they agree with those of your electric service.
· Electrical connections should be made by qualified technician or electrician, who will
observe all applicable Safety Codes and the
National Electrical Code.
· Be sure the planetary runs in the direction
shown by the arrow in the planetary head.
Reverse direction is forbidden.
· To start motor, push ON button. The speed
selector handle must be at one of the
numbers indicating a speed, not at an
intermediate position.
On a 3 Phase Mixer, the installer must check the
mixing rotation of the planetary when the
electrical is connected.