Installation, Operation and Care of 12 QT MIXER + SAVE THESE INSTRUCTIONS + GENERAL This Mixer is an advanced design, highly reliable professional food processing tool, and is ideal for missing all types of dough, as well as eggs, cream, mayonnaise, ete. This model Mixers ate equipped with powerful 1/2 HP motors and strong gear drive design. The gears are made of heat-treated alloy steel and a hardness steel worm wheel.
ELECTRICAL CONNECTIONS (Cord Connected Mixers) WARNING: THIS SUPPLY CORD ON THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG: IT IS IMPERATIVE THAT THE OUTLET TO WHICH THIS PLUG IS CONNECTED BE PROPERLY GROUNDED. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE; AN ELECTRICIAN SHOULD BE CONTACTED. A 3 PHASE MIXER SHOULD CHECK MIXING ROTATION WHEN ELECTRICAL CONNECTED. ’ INSTALLATION DIAGRAM (mm) 368 388.3 499 ; Agitate ds Model No.
OPERATION WARNING: MOVING BEATER IN BOWL. KEEP HAND, CLOTHING, AND UTENSILS OUT ‘WHILE IN OPERATION. All models are furnished with an ON-OFF switch Figure 1 (figure 1-11), which controls power to the mixer. I The GEAR SHIFT LEVER (figure 1-3) is used to 3 a change speeds. Always stop the mixer before changing speeds. To change speeds, turn the 8 switch OFF, move the gearshift lever to the desired speed, and turn the switch back ON. 4.
BEATER: Commonly used for thin batters, cake and mashing potatoes, like stuffing and preferable |] to be used at middle speed. WIRE WHIP: Best for whipping cream and beating eggs and preferable to be used at high speed BOWL New mixer’s bow! (Figure 1-6) and agitators (beaters, whip, and dough arms) should be thoroughly washed with hot water and mild soap solution, rinsed with either a mild soda or vinegar solution, and thoroughly rinsed with clean water BEFORE being put into service.
MAINTENANCE NOTE: ALL MAINTENANCE WORK SHOULD BE DONE ONLY AFTER UNIT HAS BEEN DISCONNECTED FROM ELECTRICAL POWER AND GROUNDING. Never use a metal or stiff brush to clean the mixer. Never clean the mixer with a water hose or any fluid pressure. The mixer should be thoroughly cleaned daily. Bowls and agitators should be removed from the mixer and cleaned in a sink. The transmission case and planetary mechanism should be inspected weekly for leaks, damage, etc.
WIRING DIAGRAM [MAC M het J Caw CONTROL 1 BOX Pe GUARD CONTROL L.SW 1.
