User`s manual

NetWare (NCP)
AXIS StorPoint CD E100 User’s Guide 23
Using the Installation Wizard
1. Verify that the NDS tree is synchronized. See “Synchronizing the NDS Tree ” on page 22.
2. From within the Administration Web pages, click Network Settings.
3. Click Wizard . The Network Settings Wizard dialog appears.
4. Choose NetWare (NCP). Click Start to proceed with the installation.
5. Follow the instructions as they appear on the screen. When finished, click Close.
6. Click Detailed View . The Protocols dialog box appears.
7. Open the NetWare (NCP) page and verify the settings.
8. Click OK.
9. To verify that the StorPoint CD was successfully installed, check the Event Log for errors.
Using a Text Editor
1. Login as Supervisor in bindery mode.
2. Verify that the NDS tree is synchronized. See “Synchronizing the NDS Tree ” on page 22.
3. Use a standard text editor such as Notepad to
edit the configuration parameters. From
Windows Explorer or File Manager, locate the
StorPoint CD configuration file
config.ini
file which is located in the
System/ServerProperties folder. In
NetWare, the default name of your StorPoint
CD is AXIS<nnnnnn>_NW where <nnnnnn>
are the last six digits of the StorPoint CD serial
number.