User`s manual

Installing the StorPoint CD
AXIS StorPoint CD E100 User’s Guide 11
2. Follow the instructions on the screen.
When finished, the AXIS IP Installer will be available from your Start menu. To run the program,
select Programs | Axis Communications | Axis IP Installer.
ARP - UNIX and OS/2
Type the following commands:
Syntax
Example
Text Editor - Macintosh
To set the IP address for your StorPoint CD, follow these steps:
3. Open the Chooser from the Apple menu and click the AppleShare icon.
4. From the Select a file server list, select AXIS<nnnnnn_AT> where <nnnnnn> are the last six
digits of the StorPoint CD serial number.
5. Select Registered User and click Connect. By default,
the Name is set to
root and the Password is set to pass.
6. Select the System folder and click OK.
7. Open the System icon created on the desktop and select
the Server Properties folder.
8. Open the config.ini file.
9. In the text editor go to the [IP] section and change the
Internet address to the required IP address.
10. Go to the [Server] section and set Restart = yes to restart the server.
11. Select Save from the File menu.
arp -s <IP address> <Ethernet address> temp
ping <IP address>
arp -s 192.16.253.80 00:40:8c:10:00:86 temp
ping 192.16.253.80