Installation guide

Windows for Workgroups (Microsoft Networks - SMB)
1. Start the File Manager and select Connect Network Drive…
from the Disk menu. The Connect Network Drive dialog is
displayed. You may have to click the Browse>> button to see the
complete dialogue.
2. Double click Workgroup in the top listing and double click the
entry for your new StorPoint CD. The default name is
AXIS
nnnnnn
, where
nnnnnn
are the six last digits of the serial
number.
3. The CD folder contains all the CD-ROMs. From the bottom
listing, select the CD folder and click OK.
OS/2 (IBM Networks - SMB)
1. Open an OS/2 window.
2. At the OS/2 prompt, type:
where
nnnnnn
are the last six digits of the serial number.
Example: (StorPoint CD serial no. = 00408CDB000B.)
net use E: \\AXISDB000B\cd
UNIX (NFS)
To mount the StorPoint CD on a UNIX system, you need root
privileges. Perform the following:
1. Create a directory for the StorPoint CD.
2. Mount the StorPoint CD.
where <host name>
is the host name assigned to the StorPoint
CD during the TCP/IP configuration.
Example:
mkdir storpoint
mount cdserv:/ storpoint
net use <drive>: \\AXIS
nnnnnn
\cd
mkdir <directory>
mount <host name>:/ <directory>
Use default, or
In Path, type:
\\AXIS
nnnnnn \CD
Click OK.
select an unused
drive letter.