Installation guide

Quick Installation Guide
This guide covers the installation and basic setup procedures for your
AXIS StorPoint CD. If you need more detailed instructions, e.g.
regarding Configuration and Security Management of the server,
please refer to the AXIS StorPoint CD User’s Manual.
Basic Installation
A single AXIS StorPoint CD can service up to 7 or 14 SCSI
CD-ROM drives, depending on model. The drives should be
connected using the appropriate SCSI cables, which must be ordered
separately.
Ethernet network with a standalone version AXIS StorPoint CD
Before you begin:
• Standalone version only: Check that the power supply (PS-C
or PS-E, 12V DC) is marked with the correct mains voltage.
• Make sure that power is not connected to the StorPoint CD
or any of the CD-ROM drives when making changes to the
SCSI chain. The SCSI bus may be damaged, if you connect
or disconnect any units when the power is on.
• Always consult the Network Administrator before making
changes to the network configuration.
• Make a note of the StorPoint CD serial number for future
reference during the network configuration. You will find
the number on the underside label.
AXIS StorPoint CD
CD-ROM Drives
Network Hub
Network Cables
SCSI Cables