User`s manual

Section 6: Setting Up - UNIX (NFS)
82 AXIS StorPoint CD User’s Manual
Configuration in UNIX
Internet Address
Make sure that you have set the Internet address according to the
description in “
Setup for TCP/IP
” on page 20.
Date and Time
The StorPoint CD clock has a volatile memory, which means that the
correct time must be set whenever it is restarted. The time can be set
manually by specifying the
Date
and
Time
parameter values, or it can
be set automatically via the network operating system.
Time Synchronization
You can configure your StorPoint CD for automatic time
synchronization operation by setting the
TimeSyncSource
and
NTPServer
parameters.
Parameter name Value Description
Date = 97-10-01 yy-mm-dd, enter the date followed by ! to set
manually.
Time = 14:00:00 hh:mm:ss, enter the time followed by ! to set
manually.
Parameter name Value Description
[Server]
TimeSyncSource = NTP Specifies the time source for the StorPoint CD.
Set to
NTP
for UNIX. Default is
NDS.
[IP]
NTPServer = Name or Internet address of the NTP server.