User`s manual

Section 5: Setting Up - Microsoft and IBM Networks (SMB)
76 AXIS StorPoint CD User’s Manual
Managing Security in SMB
In SMB, the AXIS StorPoint CD supports both user-level and share-
level access control.
If you need to set up particular access restrictions for specific CD-
ROMs, you are recommended to use user-level access control. If you
want to grant all users access to all the CD-ROMs, you can use either
method.
For more information on access rights for the StorPoint CD, refer to
“Section 8 -
StorPoint CD Security System
”.
User-level Access
Control in SMB
User-level access control means that the StorPoint CD validates all
users, except the local administrator, against a domain controller. On
successful login, the user is authenticated to use the StorPoint CD
resources according to the restrictions set in the access files. This is a
convenient method when you need to apply specific constraints to
specific resources.
In the configuration file, specify these parameters:
Note: ❏
All users must belong to the same domain.
Parameter name Value Description
[Server]
ServerPassword = pass Change from the default pass to the
Administrator password you wish to use.
[SMB]
SecurityMode = userLevel Specifies the security mode used for SMB.
AuthenticationDomain = Name of the domain to which the controller
used for authenticating users in user-level
security mode belongs. (Max 15 characters)
If left empty, all users will have full access in spite
of the restrictions specified in the access files.