User`s manual

Section 5: Setting Up - Microsoft and IBM Networks (SMB)
AXIS StorPoint CD User’s Manual 73
5.
In the Share/alias field, enter the name of the StorPoint CD
resource:
•
root
for root level access
•
cd
for cd folder access
• the volume name for access to an individual CD-ROM (for
example
cd_18881
)
6.
In the Local device name field, select a drive letter to map to.
7.
Click Create. The StorPoint CD is ready for use.
Note: ❏
The StorPoint CD folders will not be visible on the Desktop in
OS/2 versions prior to OS/2 WARP Connect. If you wish to use
an earlier version of OS/2, we recommend using third party NFS
software to connect to the StorPoint CD.
OS/2
If you do not have Peer for OS/2, the StorPoint CD can be mapped to
a drive letter using the
net use
command. Follow these steps:
1.
Open an OS/2 window.
2.
At the OS/2 prompt, type:
net use <drive letter>: \\AXIS<nnnnnn>\<folder
where
<nnnnnn>
are the six last digits of your StorPoint CD serial
number and
<folder>
is the StorPoint CD folder you want to map.
3.
To make the connections permanent, create or edit your
startup.cmd
file to include your net use commands.