User`s manual

Section 5: Setting Up - Microsoft and IBM Networks (SMB)
AXIS StorPoint CD User’s Manual 63
Date and Time
The StorPoint CD clock has a volatile memory, which means that the
correct time must be set whenever it is restarted. The time can be set
manually by specifying the
Date
and
Time
parameter values, or it can
be set automatically via the network operating system.
Time Synchronization
If you run SMB over TCP/IP, you can configure your StorPoint CD
for automatic time synchronization operation by setting the
TimeSyncSource
and
NTPServer
parameters.
Note: ❏
If you use DHCP, the
NTPServer
parameter is set automatically.
Parameter name Value Description
[Server]
Date = 97-10-01 yy-mm-dd, enter the date followed by ! to set
manually.
Time = 14:00:00 hh:mm:ss, enter the time followed by ! to set
manually.
Parameter name Value Description
[Server]
TimeSyncSource = NTP Specifies the time source for the StorPoint CD.
Set to
NTP
for SMB over TCP/IP. Default is
NDS.
[IP]
NTPServer = Name or Internet address of the NTP server.