User`s manual

Section 4: Setting Up - NetWare
54 AXIS StorPoint CD User’s Manual
6.
Once you are logged in to the StorPoint CD, click the Drive
Connections button on the toolbar. This screen is displayed:
Note: ❏
If the
ShowAllVolumes
parameter is set to
yes
, the individual
volumes are shown at
SYS
level. Some CD-ROM applications will
not run properly unless the data is stored at root level. To avoid
such problems, assign a drive letter to that particular CD-ROM.
7.
Double click
AXIS<nnnnnn>_NW\SYS
and then
CD
to display this
screen: