User`s manual

Section 4: Setting Up - NetWare
52 AXIS StorPoint CD User’s Manual
5.
If you are using bindery mode, you will be prompted to enter your
user name and password, unless you are already logged on. Before
the StorPoint CD has been set up, all users have full access to it.
6.
Once you are logged on to the StorPoint CD, expand the
SYS
and
Cd
folders to display all the resources:
Note: ❏
If the
ShowAllVolumes
parameter is set to
yes
, the individual cd
volumes are shown also at
SYS
level. Some CD-ROM applications
will not run properly unless the data is stored at root level. To
avoid such problems, assign a drive letter to that particular CD-
ROM.
7.
To map a StorPoint CD resource to a drive letter, select:
•
SYS
for root level access
•
Cd
for cd folder access
• the CD-ROM for access to an individual CD-ROM
8.
From the Tools menu, select Map Network Drive...
9.
Select a drive letter for your StorPoint CD.