User`s manual

Section 4: Setting Up - NetWare
42 AXIS StorPoint CD User’s Manual
Configuration in NetWare
The StorPoint CD emulates both a NetWare 3.x bindery server and a
4.x NDS server. It also supports NetWare over the IP protocol.
NetWare Server
Name
The default NetWare server name is
AXIS<nnnnnn>_NW
, where
<nnnnnn>
is the last six digits of the StorPoint CD serial number. You
can change that name by editing the NetWare
ServerName
parameter.
Installation as a
Bindery Server
If used as a bindery server, no specific installation is required prior to
using and accessing the StorPoint CD.
See information about security management in NetWare bindery
mode later in this section.
Installation as an
NDS Server
If used as an NDS server, the StorPoint CD must first be installed in
the NDS tree. This simply involves setting the appropriate
configuration parameters.
Notes: ❏
When installing the first StorPoint CD in your NDS tree, the
StorPoint CD will try to extend the NDS Schema with a new
attribute to the “NCP server” class. The extension is needed for
storing the StorPoint CD's file system rights, i.e. access rights to
the CD-ROMs and configuration files. The new attribute is called
“AXIS:SPcd:rights”. This new attribute will not affect the
operation of your NetWare servers. This schema extension has
been approved by Novell.
❏
Adding the schema extension requires Supervisor rights to the
[Root] object of the NDS Directory tree. This means that the user
in the
NDSAdminName
parameter must have Supervisor access
rights.