User`s manual

Section 2: Basic Installation
AXIS StorPoint CD User’s Manual 27
Using DHCP
Follow these steps to use the DHCP method:
1.
Edit or create a scope in the DHCP manager of the DHCP
daemon. The entries in this scope should include the following:
Range of Internet addresses
•Subnet mask
Default router address
WINS server address(es)
NetBIOS over TCP/IP
node type
NetBIOS over TCP/IP scope ID
Lease duration
2.
Activate the scope.
3.
Set the
DHCPEnable
parameter to
yes
in the
config.ini
file of the
StorPoint CD.
Node Type
The StorPoint CD can act either as a B Node (WINS
disabled), or as a H Node (WINS enabled)