User`s manual

Section 2: Basic Installation
AXIS StorPoint CD User’s Manual 25
Using RARP in UNIX
Follow these steps to use the RARP method:
1.
Append the following line to your Ethernet address or Node
address table (typically
/etc/ethers
):
Example:
The
Ethernet address
or
node address
equals the serial
number found on the underside label of the StorPoint CD with
each pair of digits separated by a colon.
2.
Make sure the host table and alias name databases are updated as
described on page 20.
3.
Start the RARP daemon (if not already running), typically by the
command:
rarpd -a
4.
Restart the StorPoint CD to download the Internet address.
<Ethernet or node address> <host name>
00:40:8c:11:00:86 cdserv