User`s manual

Section 2: Basic Installation
AXIS StorPoint CD User’s Manual 17
4.
Connect an external SCSI
terminator to the last drive
in the SCSI chain. If there
is only one CD-ROM
drive, it is the last one in the
chain and must be
terminated.
The StorPoint CD has
built-in SCSI termination
which is always switched
on. Therefore, the server
must be physically located
at one end of the chain.
This is the case for both
the single and dual SCSI
versions.
Note: ❏
Do not terminate the CD-ROM drives placed between the
StorPoint CD and the last drive.
5.
Turn on power:
Standalone version only:
First connect power to all the CD-ROM
drives and turn them on. Then connect the external power supply
to the StorPoint CD.
Tower module only:
Simply switch the power on to the whole of the
CD-ROM tower.
The StorPoint CD front panel indicators will flash during power-on
and self-test. When the Status indicator stops flashing and remains off,
the StorPoint CD is ready for use.
External SCSI terminator