User`s manual

Section 2: Basic Installation
AXIS StorPoint CD User’s Manual 9
Section 2 Basic Installation
This section includes step-by-step instructions for installing the
StorPoint CD hardware. It also covers setup procedures for TCP/IP
and the AXIS WinPoint software utility.
Ethernet network with a standalone version AXIS StorPoint CD
You install the StorPoint CD onto your network in these stages:
• Installing the StorPoint CD/T in a CD-ROM tower
• Connecting the CD-ROM drives to the StorPoint CD
• Connecting the StorPoint CD to the network
You must then configure the StorPoint CD for your network
environment. See “
Setup Summary
” on page 19.
StorPoint CD
CD-ROM drives
Network hub
Network cables
SCSI cables