User`s manual

Appendix B: Troubleshooting
AXIS StorPoint CD Token Ring - User’s Manual 99
Error Conditions This table shows various error conditions:
* Flashing, short interval.
** Flashing, long interval.
Status Indicator Red If the Status indicator turns red, this indicates a serious error in the hardware. If
this happens, contact your dealer and return the unit for replacement.
Event Action Status LED SCSI
LED
Network
LED
New firmware required.
Flash loading via FTP
possible.
AMBER **
Illegal serial number. Return unit. RED *
Error in Flash PROM. Return unit. RED **
Error in DRAM. Return unit. RED **
Error in DRAM
expansion module.
Replace DIMM module.
RED /
AMBER
Fatal SCSI error. Return unit. RED
Drive disconnected or
not working properly.
Check drive connection. RED *
The network connection
is down.
Check network cabling,
use another port to the hub.
RED