User`s manual

Appendix B: Troubleshooting
98 AXIS StorPoint CD Token Ring - User’s Manual
The Front Panel Indicators
The front panel indicators show the status of your StorPoint CD. The indicators
have the following functions:
• Status - Flashes during startup and turns solid green when your StorPoint
CD is ready for use.
• SCSI - Flashes to indicate activity on the SCSI bus.
• Network - Flashes to indicate the presence of network traffic.
• Power - Indicates that power is connected to the StorPoint CD unit. This
LED should always remain lit and is only used to indicate power is present
in the StorPoint CD unit.
Normal Conditions The Power LED is controlled by hardware and is always green when power is
connected. When the system starts running after startup, the Status LED turns
solid green. The SCSI and Network LEDs are turned off.
This table shows the other front panel indicators under normal conditions:
* Flashing, short interval.
** Flashing, long interval.
Event Status LED SCSI LED Network LED
Initial power to unit. GREEN GREEN GREEN
Power-up and self-test,
approx. 30 seconds.
GREEN GREEN GREEN
Firmware preparation GREEN
Firmware startup. GREEN *
Startup sequence OK. GREEN
Normal operation. GREEN
Reading from the SCSI bus. GREEN *
Packet arrived. GREEN *
Flash loading in progress. AMBER *