User`s manual

Appendix A: Parameter List
94 AXIS StorPoint CD Token Ring - User’s Manual
FTP You can retrieve the configuration parameters of your StorPoint CD using the
File Transfer Protocol (FTP). FTP is supported by most operating
environments.
Follow these instructions:
1. Start a DOS session.
Caution!
Windows 95 only: Change directory not to overwrite any of your system
files. See the caution note below. Windows 95 has a directory called
config
that contains important system files. It is therefore important to change to
another directory using the
cd command before modifying your StorPoint
CD configuration file from within the Windows 95 environment. Failure to
do this may result in some of your system files to be overwritten.
2. Log in to StorPoint CD with the command:
where
<IP address> is the name or IP address of your StorPoint CD.
3. You will be prompted for user ID and password. Use the user ID
root, which
has the default password
pass.
4. To access the configuration file, type:
5. Edit the
config file using any text editor. In the Windows 95/98 and
Windows NT environments, you can for example use Notepad. Once the
editing is complete, save the file as
config.
6. To upload the configuration file to your StorPoint CD, type:
7. To exit FTP, type the command
quit, bye, or exit.
ftp <IP address>
get config.ini
put config.ini