User`s manual

Section 5: UNIX (NFS)
74 AXIS StorPoint CD Token Ring - User’s Manual
Notes: To increase performance, you can set the buffer size to 8192 as an option in
the mount command on most UNIX systems, e.g.
Different UNIX systems may have different mount command options. See
the manual page on the client system.
NFS for PC StorPoint CD can also be accessed using third party NFS software for PC
computers. If you run a TCP/IP network, this is an alternative to SMB. Refer to
the NFS software documentation for instructions on how to mount StorPoint
CD.
General Disc Settings To specify the general settings for an inserted disc, follow these steps:
1. Start your Web browser, and enter the name or IP address of your StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the Server password. By default, this
is set to
pass.
3. Click Discs & Drives.
4. Locate the desired disc in the file Volumes folder.
5. Click Access Rights . The Access Rights dialog box appears:
6. Select the General tab. You can specify the following settings:
• Name - The volume name that will be presented to the clients. If left
blank, the volume label will be used.
• Description - The description that will be displayed in Windows
Explorer.
• User Limit - The number of users that will have access to the disc. To
disable this function, enter the value 0 into this field.
7. Click OK.
mount -o rsize=8192 <IP address>:<resource>
<mountpoint>