User`s manual

Section 5: UNIX (NFS)
AXIS StorPoint CD Token Ring - User’s Manual 71
Section 5 UNIX (NFS)
This section outlines the required configuration settings for running your
StorPoint CD in the UNIX (NFS) environment, how to set up access
restrictions and how to mount the StorPoint CD resources.
Note:
Make sure you have set the Internet address as described in “Assigning an IP
Address” on page 12.
If you are using StorPoint CD in a multiprotocol environment, proceed to the
other relevant sections of the manual, namely:
“Section 3 - Microsoft & IBM Networks (SMB) ”
“Section 4 - NetWare (NCP) ”
“Section 6 - Web Browser (HTTP) ”
Network Settings
Use the Administration pages within the StorPoint CD Web interface to
configure your StorPoint CD.
1. Start your Web browser, and enter the name or IP address of your StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the user name and the Server password.
By default, these are set to
root and pass.
3. Click Network Settings.
4. Click Detailed View . The Protocols dialog box appears.
5. Select the UNIX (NFS) tab and specify the settings.
6. Click OK.
Notes:
Context sensitive online help is available for all parameters.
The parameter list is described in detail in “Appendix A - Parameter List ” .