User`s manual

Section 4: NetWare (NCP)
AXIS StorPoint CD Token Ring - User’s Manual 59
Accessing the Discs
StorPoint CD makes your networked CD/DVDs available to anyone who has
the appropriate privileges on the network. Users will access StorPoint CD just as
any other workstation or file server.
You use your standard NetWare client to access the networked discs:
Notes:
The examples will assume that you have not changed the default server
name. The default server name is
AXIS<nnnnnn>_NW, where <nnnnnn> are
the six last digits of the StorPoint CD serial number. If you have changed
the server name, use the new name where the examples refer to the default
name.
Depending on the access rights set up by the Administrator, you might be
prompted to supply a password or receive a message similar to ‘
Access is
denied
’ when trying to access a shared resource on the StorPoint CD. The
default Server password is
pass.
In the Windows 95/98 and Windows NT 4 environments, you can install
the AXIS StorPoint DISCO utility, which is a powerful Windows
application for locating and using CD/DWindows ExplorerVDs located on
AXIS Storage Servers, wherever they are on your network. Refer to “AXIS
StorPoint DISCO” on page 40.
General Disc Settings To specify the general settings for an inserted disc, follow these steps:
1. Start your Web browser, and enter the name or IP address of your StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the Server password. By default, this
is set to
pass.
3. Click Discs & Drives.
4. Locate the desired disc in the file Volumes folder.
Network environments See ...
Windows 95/98 and Windows NT 4 (NDS) page 60
Windows 95/98 and Windows NT 4 (Bindery) page 62
Windows for Workgroups 3.x (NDS) page 64
Windows for Workgroups 3.x (Bindery) page 66
Windows NT 3.51 (NDS) page 68
Windows NT 3.51 (Bindery) page 69
DOS page 70