User`s manual

Section 4: NetWare (NCP)
52 AXIS StorPoint CD Token Ring - User’s Manual
3. Use a standard text editor such as Notepad to edit the configuration
parameters. From Windows Explorer or File Manager, locate the StorPoint
CD configuration file,
config.ini which is located in the
System/ServerProperties folder.
4. Enter the appropriate settings for these parameters:
Parameter name Value Description
[Server]
TimeZone = Must be set to the correct time zone that StorPoint CD is
operating in. See “Time Zone Parameter Values” on page 90.
TimeSyncSource = NDS Set to NDS to enable StorPoint CD to get its time from the
NetWare network.
[NetWare]
IPXEnable = yes Set to yes to enable the IPX protocol.
PureIPEnable = no Set to no to disable PureIP for non-TCP/IP networks.
NDSEnable = yes Must be set to yes to enable the NDS login.
NDSTreeName = The name of the tree where you want to install StorPoint CD,
e.g. MEDCORP
NDSServerContext = The distinguished name of the context in the NDS tree where
you want to install StorPoint CD, e.g. Manufacturing.Medtec
NDSAdminName = The distinguished name of a user or administrator with
Supervisor or Create rights to the context where you want to
install StorPoint CD, e.g. Admin.Medtec
NDSAdminPassword = The password of the administrator entered in
NDSAdminName shown above. Once written, this password
will appear as ******.
NDSInstall = install Change this to install when you are ready to install StorPoint
CD. The setting forced will overwrite the existing server object
without warning.
NDSRightsStorage = NDS Set to NDS to store the access rights in the NDS tree. Set to
File to store the access rights in a file on the Novell server.
This is necessary if you do not allow schema extensions in
your NDS tree, or if you do not have Supervisor access rights.
NDSRightsFile = If storing the access rights in a file on the Novell file server,
specify the whole path to the file, e.g.
CORPSERVER/SYS:CDSERVER/CDSRV.DAT
The specified directory must exist and the StorPoint CD must
have Read, Write, Create, Erase, Modify and File Scan rights.
The StorPoint CD will create the file once you start adding
trustees.
TimeSyncSources = SAP Default is SAP for the network agreed time. Alternatively,
enter a list of server names to be contacted for time
synchronization.