User`s manual

Section 4: NetWare (NCP)
AXIS StorPoint CD Token Ring - User’s Manual 49
Section 4 NetWare (NCP)
This section outlines the required configuration settings for running your
StorPoint CD in the Novell NetWare environment, how to set up access
restrictions and accessing the discs.
StorPoint CD supports a maximum of 1000 users in NetWare.
If you intend to use StorPoint CD in a multiprotocol environment, proceed to
the other relevant sections in this manual, namely:
“Section 3 - Microsoft & IBM Networks (SMB) ”
“Section 5 - UNIX (NFS) ”
“Section 6 - Web Browser (HTTP) ”
Network Settings
StorPoint CD emulates both a 5.x NDS server and a NetWare 3.x bindery
server. It also supports NetWare/IP and PureIP. In NetWare 5 environments,
StorPoint CD can be integrated as any other 5.0 server simultaneously accessed
via IPX, NetWare/IP and PureIP.
If your network supports TCP/IP, you can use the Administration Web pages to
configure your StorPoint CD.
NetWare Server
Name
The default NetWare server name is
AXIS<nnnnnn>_NW, where <nnnnnn> are
the last six digits of the StorPoint CD serial number. This is the name that will
be presented to the NetWare clients on the network. You can change that name
by editing the NetWare Server Name parameter. It is useful to choose a more
descriptive name, e.g. in order to indicate where the unit is located.
Recommendation!
Choose a more descriptive name for your server, e.g. CD Server.
Time Synchronization Make sure you specify the time synchronization source properly. Refer to
“Date & Time” on page 23.