User`s manual

Section 3: Microsoft & IBM Networks (SMB)
32 AXIS StorPoint CD Token Ring - User’s Manual
Accessing the Discs
StorPoint CD makes your networked CD/DVDs available to anyone who has
the appropriate privileges on the network. Users will access StorPoint CD just as
any other workstation or file server.
The way you access the StorPoint CD resources depends on your network
environment:
Notes:
The examples will assume that you have not changed the default server
name. The default server name is
AXIS<nnnnnn> where <nnnnnn> are the
six last digits of the StorPoint CD serial number. If you have changed the
server name, use the new name where the examples refer to the default
name.
Depending on the access rights set up by the Administrator, you might be
prompted to supply a password or receive a message similar to ‘
Access is
denied’ when trying to access a shared resource on StorPoint CD. The
default Server password is
pass.
In the Windows 95/98 and Windows NT 4 environments, you can install
the AXIS StorPoint DISCO utility, which is a powerful Windows
application for locating and using CD/DVDs located on AXIS Storage
Servers, wherever they are on your network. Refer to “AXIS StorPoint
DISCO ” on page 40.
General Disc Settings To specify the general settings for an inserted disc, follow these steps:
1. Start your Web browser, and enter the name or IP address of your StorPoint
CD in the location/address field.
2. Click admin. You will be prompted for the user name and Server password.
By default, these are set to
root and pass.
3. Click Discs & Drives.
4. Locate the desired disc in the file Volumes folder.
Network environments See ...
Windows 95/98 & Windows NT page 33
Windows for Workgroups 3.x page 35
Windows NT 3.51 page 36
OS/2 Warp 4 page 37
IBM Peer for OS/2 page 37
DOS page 39