User`s manual

Section 2: Installing StorPoint CD
AXIS StorPoint CD Token Ring - User’s Manual 23
Date & Time 1. On the This StorPoint page, click Settings to open the Server Settings
dialog box.
2. Open the Date & Time page.
3. Specify the time zone in which StorPoint CD operates. Refer to
“Time Zone Parameter Values ” on page 90.
4. To set the time using a time synchronization source, choose Automatically and
specify the time source according to this table:
To set the time manually, choose Manually and specify the date in
yy-mm-dd format, and time in hh:mm:ss format using the 24 hour clock.
5. Click Close.
Network
environment
Time Source
parameter
Additional parameters
NetWare IPX Novell Directory
Services (NDS)
Time Source parameter on the Network
Settings | NetWare page:
- SAP or
- List of server names.
NetWare PureIP
NetWare/IP
Novell Directory
Services (NDS)
Time Source parameter on the Network
Settings | NetWare page:
- List of server names or IP addresses.
TCP/IP Network Time
Protocol (NTP) *
NTP Server parameter on the Server
Settings | Date & Time page:
- Name or IP address of the time server.
Windows NT
domains
Microsoft Windows
NT Network (SMB)
* Note: NTP is not natively supported by Windows NT servers. You will need third
party software.