User`s manual

Section 2: Installing StorPoint CD
14 AXIS StorPoint CD Token Ring - User’s Manual
Example
The serial number of your StorPoint CD is 0002313E5207 and you want to
assign it the IP address 192.16.253.80. Your Windows client has the IP
address 192.16.6.40. You enter the following in the location/address field:
StorPoint CD will retrieve the first two groups of the new IP address from
the subnet where the client issues the broadcast. When the IP address has
been successfully set, the StorPoint CD File View page will appear in your
Web browser.
The new IP address must be set within 30 minutes after restart.
This method will work for most Windows configurations. However, if you
experience problems when using this method, we recommend that you use
AXIS IP Installer for setting the IP address. See “AXIS IP Installer ” on page
14.
AXIS IP Installer AXIS IP Installer is an application that allows you to assign IP addresses to your
StorPoint CD, find IP addresses of already installed StorPoint CD Servers and
access the StorPoint CD Web interface for easy configuration.
The required utility software is available on the AXIS Storage Online CD. It can
also be downloaded from the Axis Web site at http://www.axis.com
Follow these steps to install the AXIS IP Installer:
1. Locate the setup file,
Setup.exe, and choose the Run option from the
Windows Start menu.
2. Follow the instructions on the screen.
When finished, AXIS IP Installer will be available from your Start menu. To run
the program, select Programs | Axis Communications | AXIS IP Installer.
3E5207_253_80
1. Select the serial number
of your StorPoint CD in
this list.
2
. Enter the desired IP
address in this field.