User`s manual

Appendix D: Tower and Drive Installation
AXIS StorPoint CD Token Ring - User’s Manual 117
4. Fix the StorPoint CD unit with the four screws supplied. Use the upper or
lower holes depending on type of tower and mounting.
Caution!
The length of the screws must not exceed 0.2 inch (5 mm). If they do,
internal components may become damaged.
5. Attach the power cord to the StorPoint CD unit . The power supply connector
is a standard PC 4-pin power supply connector (12 and 5 V DC). Hence, the
power supply available in the tower can also be used to supply the StorPoint
CD unit.
6. Connect the external network connector board to the StorPoint CD unit using
the ribbon cable.
7. Mount the board on the back of the tower. The mounting plate on the board
fits into the standard Centronics cut-out available on most towers.
8. Attach the product label to the back of the tower.