User`s manual

Appendix C: Upgrading StorPoint CD
AXIS StorPoint CD Token Ring - User’s Manual 113
Installation Procedure Follow these steps to add the memory module:
1. Unplug the power supply from your StorPoint CD.
2. Remove the server casing.
3. Mount the memory module by sliding it into the X6 socket at an angle of 45
degrees. Once the module is fully inserted, press it downwards towards the
PCB, until the socket locks the module into place.
Caution!
Always use an antistatic bracelet when handling the memory modules.
4. Replace the server casing.
5. Power up yourStorPoint CD. The new memory module is automatically
identified and the usage optimized by StorPoint CD.
Front
Position X6
Position X5