User`s manual

Section 2: Installing StorPoint CD
AXIS StorPoint CD Token Ring - User’s Manual 11
Connecting StorPoint CD to the Network
Before You Begin Always consult the Network Administrator before making changes to the
network configuration.
Procedure To connect your StorPoint CD to your network, follow these steps:
1. Turn off the power.
2. Set the ring speed of the StorPoint CD server to the ring speed of the network
(4 or 16 Mb/s) using the ring speed switch. Carefully slide the switch to the
left to change to 4Mb/s. For 16Mb/s, place the switch in the right hand
position.
Note:
The ring speed setting will not take effect until the StorPoint CD server has
been restarted.
3. Connect the network cable tp the appropriate connector.
4. Switch on the tower.
The StorPoint CD front panel indicators will flash during power-on and self-
test. When the Status indicator stops flashing and turns solid green, your
StorPoint CD is ready for use.
Network hub
Network cables
StorPoint CD
installed in a
CD tower