User`s manual

Appendix B: Troubleshooting
AXIS StorPoint CD Token Ring - User’s Manual 101
Config.ini To restore the defaults settings using the config.ini file:
1. Locate the
config.ini file using your standard file manager tool. You will
find it in the
Root/System/ServerProperties folder.
2. Use your preferred text editor and change the Factory Defaults parameter to
configuration, volumeProperties or all. You will find the Factory Defaults
parameter under the [Server] section.
3. Change the Restart parameter to yes. You will find the Restart parameter
under the [Server] section.
4. Save the
config.ini file.
The factory default setting will now be restored and your StorPoint CD will
automatically restart.
Push Button To restore the default settings using the Push button:
1. Shut down the StorPoint CD unit.
2. Use a thin object, e.g. a pen to press and hold the Push button.
Caution!
Take care not to change the position of the ring speed switch, i.e. the small
white slide switch.
3. Switch on the StorPoint CD unit.
4. Wait until the Status indicator flashes yellow (one flash/second).
5. Let go of the button at least two seconds.
6. Press and hold the Push button again until the Status indicator shows a steady
yellow light. This may take 5-6 seconds.
7. Restart the StorPoint CD unit by switching the server off and on. StorPoint
CD is now reset to factory default settings.
Push button