User manual

26
6. Now slide the camera bracket with the camera
into place to line up with 4 screws from the
standoffs.
Continued . . . . . . . .
Installing Camera Bracket
Toshiba WB21A
5. The 2.75" standoffs will be inserted on the
lower portion of the D2.
Picture represents standoff location & orientation.
Height of standoffs will vary depending on camera used.
7. Secure the plate by using (4) 1.0" standoffs to
lock the bracket in place. The two front location
will require the use of (2) .25" washer. See
picture.
Picture represents camera bracket orientation & how it is
secured. Don’t’ forget to mount your camera to the D2
camera bracket based on instructions.